מכשיר לבדיקת דליפת גז במזגן/ מקרר

 המשלוח הוא לנקודת שירות(איסוף מחנות הקרובה לביתך)   

• • 100% Brand new Halogen Gas HFC CFC Refrigerant Leak Detector Checker. -Do your bit for the environment and check for potentially harmful halogen leaks with this portable, handheld leak checker. -Its advanced detection technology enables it to recognize all HFC (134a) CFC refrigerants. -Audio and visual alerts warn of any leakages, no matter how small
  • Detects all HFC (134a) CFC refrigerants
  • Protect the environment
  • Audio 'siren' and visual LED light alert when leak is found
  • Excellent sensor with high sensitivity, 6g/yr (0.2oz/yr)
  • Flexible probe allows you to reach into awkward corners and tight spaces
  • Highly precise for accurate readings time after time
  • Re-set function enables you to set the meter to ignore ambient concentrations of halogen
  • Reads in just 6 seconds
  • Battery life indicator
  • Check your entire refrigerating system including the fittings, house to line couplings, controllers, service parts, the areas around the points of attachment, hold downs on lines and components
  • Applications:
  • Detect leaks in air-conditionings, freezing systems and so on
  • It will respond to ALL halogenated (contains Chlorine of Fluorine) refrigerants
  • This includes, but is not limited to:
  • CFCs: R12, R11, R500, R503etc
  • HCFCs: R22, R123, R124, R502etc
  • HFCs: R410a,R134a, R404a, R125 etc
  • Blends such as HP62,MP39,AZ-50 etc
  • Detects halogen gasses in fire extinguishing systems
  • Detect SF-6 in high voltage circuit breakers
  • Detect most gases that contain Chlorine, Fluorine, and Bromine (halogen gases)
  • Detect ethylene oxide gas of medical instruments
  • Detect cleaning agents used in dry cleaning applications such as perchloroethylene
  •  

• • Operating temperature: 0°C to 52°C (30°F t 125°F)
  • Maximum sensitivity: 6gr/yr for all halogenated refrigerants
  • Battery life: approximately 50 hours normal use
  • Response time: immediate
  • Work mode: continuous no limitations
  • Fixed probe length: 17cm
  • Unit dimensions: 22.9cm x 6.5cm x 6.5cm
  • Warm-up time: approximately 6 seconds
  • Reset time: 2 to 10 seconds
  • Powered by: x4 AAA 1.5V batteries (not included)
  •